Winch machine, also known as high-speed winder, wire binding machine, Nim wire machine. Winch is widely used in all kinds of soft / hard conductors (copper wire, lacquer wire, tin-plated wire, copper-coated steel, copper-coated aluminum, etc.) and electronic wire, such as power cord, telephone cable, audio wire, video cable, automobile wire network line and so on. Make multiple single conductors twist into a strand to reach the wire rod process. The following are the technical characteristics of the high speed winch: 1, the rotating speed of the main shaft of the winch can be as high as 3000rpm. 2. Automatic tension control: when the wire is twisted, when the wire is received from the bottom of the disk, the tension of the receiving line needs to be continuously increased, and this function automatically tracks and adjusts the tension of the receiving line. The tension of the whole disk is uniform and consistent, and the tension can be adjusted without stopping. 3. There are three compression devices in the machine to ensure the roundness of the conductor after hanging and reduce the loss of insulation material. 4, the main engine oil lubrication, natural cycle cooling, effectively prolong the service life of spindle bearings. The wire crossing system adopts a new structure, and the wire passes directly from the spindle guide wheel to the bow belt, which subtracts the scraping and stock jump caused by the failure of the angle guide wheel on the aluminum disk. 5, the whole machine adopts synchronous belt transmission, there is no lubrication point in the machine, keep the machine clean, the winch is free of oil pollution, and adapt to the conductor twist of all kinds of wire types with high surface cleanliness requirements. Together. 6. it is only necessary to replace one lead wheel to adjust the winch distance, and to adjust the winch only needs to pull the reversing rod, which can be operated simply and conveniently, so as to reduce the error rate and working intensity of the operator. The bearings of the whole machine are all made of famous Japanese brands, the bow belt is made of new materials, and the flexibility is good. When running at high speed, it avoids the stock jump caused by vibration, frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic Jack and so on, all of which adopt imported famous brands to reduce the failure rate and maintenance cost.