Both the single winch and the twisted pair wire the conductor into cables. So what's the difference between the two? Let's start with the definitions. Single winch is to winch the core cable of all kinds of data cable, and can realize the completion of the center and side packing belt at one time. It mainly focuses on the cable formation of the core wire. Sometimes it can also be called cable forming machine. Twisted pair, is to all kinds of cable conductors for wire twists and strands. The large twisted pair can also realize the cable formation of the core wire. Usually, we also turn the twisted pair into a high speed winch. From the basic definitions of the above two, we can know that the main differences between single winch and twisted pair are as follows: essential difference: twist The bow completes a lap, and the completion of a strand distance is a single twist. If the bow rotates one turn and completes two twisted distances, it is a twisted pair. This is also the difference between the two. The difference in application: the single winch focuses on the core cable of large data cable, that is, cable formation. The twisted pair, on the other hand, mainly focuses on the twisting of cable conductors. That is, the focus of the two is different. So what are the characteristics of single winch and twisted pair? From the above essential definition, when the winch completes a lap, the single winch can only achieve one winch distance. That is to say, in terms of efficiency, the single winch is lower than the twisted pair. Although the production efficiency of the single winch is very low. Many, but the twisting quality of the single winch and cable quality is much better. Therefore, cable manufacturers in the selection can also be based on their own situation to choose. If focus on quality, then single winch is a good choice. If the emphasis is on efficiency, then the twister, or high-speed twister, is more appropriate.