Cutting machine working principle 1, main components function 1, intake wheel: conveying line and peeling head. When stripping, the stripper has a peeling head and tail (the length of the line is less than 50 mm). In the stripping process, except the stripping head, the stripper has the stripper function in the middle of the stripper. Pulley: conveyor line and peeling machine peeling tail. Stripping pliers do not affect stripping, so the pulley upward knob should be in the U position. 3, feed wheel clearance adjustment knob: adjust the feed wheel clearance of stripping tower, increase the upper pendulum clearance, reduce the lower pendulum clearance (adjusted according to the thickness of the wire rod). 4, the pressure adjustment knob of the inlet wheel of the stripping tower: adjust the steam Lift tower inlet wheel pressure, pull out clockwise rotation, increase inlet wheel pressure, pull out counterclockwise rotation, reduce inlet wheel pressure. (according to the strength of the steel wire skin, that is, difficult peeling, difficult pressure increase, easy pressure reduction) 5, the feed wheel lift knob: when the stripper thread is lifted, the feed wheel is lifted, turn the knob clockwise to lift the feed wheel, so that the feeding wheel passes smoothly; when working, the feeding wheel is reduced, the counterclockwise turn knob reduces the feeding wheel. L and press the wire. 6, outlet wheel gap adjustment knob: adjust the outlet wheel gap of stripping tower, increase the upper pendulum gap, and reduce the lower pendulum clearance (adjusted according to wire thickness). 7. Exports Wheel pressure adjustment knob: adjust the outlet wheel pressure of the stripping tower, rotate counterclockwise after pulling out, increase the outlet wheel pressure, rotate clockwise after pulling out, and reduce the inlet wheel pressure. According to the strength of steel wire skin, that is, difficult peeling, difficult pressure increase, easy pressure reduction. 8, pulley lifting knob: lift pulley when pulling out steel wire, turn knob counterclockwise to lift pulley, so that steel wire can be pulled out smoothly; reduce pulley while working, turn knob down pulley clockwise. (when using the short stripping program, the pulley should be raised) 9, tool holder assembly: on the wire stripping machine responsible for wire cutting, stripping head and tail, under the condition of shutdown, the upper and lower blades are required Open the line to a greater extent so that the line can pass through the tool smoothly.